RDO PRO-X opgeloste zuurstofsensor

RDO PRO-X OXYGEN PROBE

SENSOR TYPE

Optical DO probe uses Classic Sensor Cap.

RANGE, DO

0to60mg/L

ACCURACY, DO

±0.1 mg/L, 0 to 20 mg/L
±2% of reading, 20 to 60 mg/L

RESOLUTION, DO

0.01 mg/L

RESPONSE TIME, CAP

T90: <45 sec. T95: <60 sec. @ 25° C

RANGE, TEMP.

0°to50°C(32°to122°F)

ACCURACY, TEMP.

±0.1° C typical

RESOLUTION, TEMP.

0.01° C

SALINITY COMP.

Fixed or real-time capable

BAROMETRIC COMP.

Fixed or real-time capable

METHODS

EPA-approved In-Situ® RDO methods 1002-8-2009, 1003-8-2009, 1004-8-2009 Standard Methods 4500-O

ENVIRONMENTAL RATINGS

PRESSURE

150psifrom0°to50°C;300psi@25°C

DEPTH

210m(689ft)@25°C

OPERATING TEMP.

Probe: 0° to 50° C (32° to 122° F)

STORAGE TEMP.

Sensor cap: 1° to 60° C (33° to 140° F), in factory container
Probe: -5° to 60° C (23° to 140° F)

COMPLIANCE

Heavy industrial, IEC 61000-6-2:2005

IP RATING

IP-67 with cap off; IP-68 with cap installed

CHEMICAL RATINGS

INTERFERENCES

Alcohols >5%; hydrogen peroxide > 3%; sodium hypochlorite (commercial bleach) > 3%; gaseous sulfur dioxide; gaseous chlorine. Do not use in organic solvents (e.g., acetone, chloroform, methylene chloride, etc.), which may swell the sensing element (foil matrix) and destroy it.

GENERAL RATINGS

COMMUNICATION OUTPUT

Modbus/RS485, SDI-12, 4-20 mA

POWER REQUIREMENTS

8to36VDC

POWER CONSUMPTION

Maximum: 50 mA at 12 VDC

CABLE LENGTHS

Modbus and 4-20 mA: Up to 1,219 m (4,000 ft) SDI-12: Up to 61 m (200 ft)

INT. MOUNTING THREAD

1-1/4 NPT

WARRANTY

Probe: 3 years from date of shipment Cap: 2 years in typical applications